Bryant NON-PROGRAMMABLE THERMOSTAT Manuál s instrukcemi stáhnout pdf (Strana 9)

AC/HP Control should NOT be mounted:

S Close to a window, on an outside wall, or next to a door leading to the

outside.

S Exposed to direct light or heat from a lamp, sun, fireplace, or other

temperature--radiating objects which could cause a false reading.

S Close to or in direct airflow from supply registers and return--air regis-

ters.

S In areas with poor air circulation, such as behind a door or in an al-

cove.

Installer should determine whether control will be installed as single-- piece or

two--piece. In single--piece configuration, as many as 14 wires may need to run

to wall mounting location for connection to the control. In two--piece

configuration, the Display Module and Equipment Control Module are

connected by two wires.

Install AC/HP Control

ELECTRICAL OPERATION HAZARD

Failure to follow this warning could result in personal injury or

death.

Before installing AC/HP Control, turn off all power to

equipment. There may be more than 1 power disconnect.

WARNING

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Žádné komentáře

Bryant NON-PROGRAMMABLE THERMOSTAT Manuál s instrukcemi Strana 9