Bryant operating and service and main Manuál s instrukcemi stáhnout pdf (Strana 11)

the homeowner manually activates emergency heat. Emergency

heat is manually activated by pressing the red HEAT button for

four seconds. Emergency heat operation is confirmed when the

red LED adjacent to the red HEAT button is lit, pulsing on, then off,

continuously every 1.25 seconds. The text, “EMERGENCY HEAT”

will appear below the room temperature (in place of the text,

“ACTUAL TEMPERATURE”). To deactivate emergency heat, press

the red HEAT or blue COOL button.

Cooling

To select cooling, press the blue COOL button.

Cooling is confirmed when the blue LED adja-

cent to the blue COOL button is lit. Cooling is

operating when the blue LED is gradually puls-

ing on and off at a rate of 2.5 cycles per sec-

ond. (The LEDs can be turned off. For details,

see ADVANCED SETUP – LIGHTING on page

26.) The programmed cooling temperature will appear in the lower

right screen with the text, “COOL AT.”

Auto

The AUTO function allows your Evolution

™

Control

to automatically switch between heating and

cooling operation to maintain your comfort dur-

ing transitional heating and cooling seasons.

To select AUTO operation, press the red HEAT

and blue COOL buttons simultaneously. The red

and blue LEDs will light up, and both heating

and cooling temperatures will be displayed.

NORMAL OPERATION 8

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 34 35

Žádné komentáře

Bryant operating and service and main Manuál s instrukcemi Strana 11